
ELECTRIC NAIL FILE
There are 21 products.
FILTER FOR MILLING MACHINE WITH AN ABSORBER
FILTER FOR MILLING MACHINE WITH AN ABSORBER
Replaceable filter for the PEDI LUX, CLASSIC FILE, SYIS PODO LINE and EXO SUPERnova milling machine timely replacement of the filter extends the service life of the suction turbine of the milling machine. Change should be made when a drop in suction power becomes noticeable, and at the latest when the filter is full to 2/3. Working with a filled filter, the turbine receives a smaller amount of air, which increases the operating temperature, which may damage it.
Quantity: 1 pcs.
Technical data:
length: 17cm,
width: 9.4 cm
hole diameter: 2.2 cm
Replaceable filter for the PEDI LUX, CLASSIC FILE, SYIS PODO LINE and EXO SUPERnova milling machine timely replacement of the filter extends the service life of the suction turbine of the milling machine. Change should be made when a drop in suction power becomes noticeable, and at the latest when the filter is full to 2/3. Working with a filled filter, the turbine receives a smaller amount of air, which increases the operating temperature, which may damage it.
Quantity: 1 pcs.
Technical data:
length: 17cm,
width: 9.4 cm
hole diameter: 2.2 cm
€9.90
SAEYANG DRILL MARATHON HANDY 702 + S40-FS60N BRUSHED
Prosthetic milling machine HANDY 702 with brush head S40-FS60NProfessional, precise prosthetic milling machine with high power, vibration-free and very quiet during operation. The hermetically contained brushless micromotor in the head reduces the noise level by 20% compared to conventional models, which results in comfortable work. The milling machine is characterized by high endurance and work reliability, has an ergonomic construction of the base and the blade, thanks to its construction it can be used as a stationary milling machine as well as a portable one. Controlled from the base and a foot drive with smooth regulation.
€379.00
MILLING MACHINE WITH SYIS PODO LINE
Out-of-Stock
The SYIS PODO LINE milling machine was designed and built in accordance with Directive 93/42 / EEC concerning medical equipment, and the modifications made to it guarantee quality and safety.
The device is intended for the treatment of foot complaints and professional pedicure procedures and may be operated only by a qualified podologist or pedicurist. The milling machine (micromotor) is characterized by smooth speed control up to 30,000 per minute , with the possibility of changing the direction right - left , and a dust absorber . An indispensable advantage of the device is an electronic display that allows you to control the intensity of the treatment and the extraordinary power of the 300 W suction turbine .
The milling machine has a filter filling counter.
The device is intended for the treatment of foot complaints and professional pedicure procedures and may be operated only by a qualified podologist or pedicurist. The milling machine (micromotor) is characterized by smooth speed control up to 30,000 per minute , with the possibility of changing the direction right - left , and a dust absorber . An indispensable advantage of the device is an electronic display that allows you to control the intensity of the treatment and the extraordinary power of the 300 W suction turbine .
The milling machine has a filter filling counter.
€899.00
€999.00
POTENTOMETRIC DRIVE FOR MARATHON HANDY 700, ECO 450, ESCORT II PRO
Last items in stock
The foot switch enables smooth adjustment of the milling machine's revolutions.
€37.00
SAEYANG H200 HEAD FOR MARATHON MILLING MACHINE
Marathon head model H200 - for milling machines Champion
· Speed: 30,000 rpm
· Torque: 2,9 Ncm
· 12V / 24V / 30V
· Speed: 30,000 rpm
· Torque: 2,9 Ncm
· 12V / 24V / 30V
€119.00
CLASSIC FILE MILLING MACHINE
The Classic File milling machine is used to treat foot complaints
and pedicures.
The device has been designed and built in accordance
with Directive 93/42 / EEC concerning medical equipment,
and modifications made to it guarantee quality and safety. The milling machine may only be operated by a qualified podologist or pedicurist.
and pedicures.
The device has been designed and built in accordance
with Directive 93/42 / EEC concerning medical equipment,
and modifications made to it guarantee quality and safety. The milling machine may only be operated by a qualified podologist or pedicurist.
€795.00
€895.00
POTENTOMETRIC DRIVE FOR MARATHON N2, N7, K35 CRAFIEN MILLING MACHINES
The foot switch enables smooth adjustment of the milling machine's revolutions.
€30.58
Promed 4030 SX 2 milling machine set with an absorber
Milling machine of the renowned German company PROMED. The 4030 SX 2 model is professional - it is suitable for both manicures and pedicures. The solid handle of the milling machine will ensure many years of work at the highest level - the handle is one of the lightest on the market - only 95g - with many hours of pedicure work, every few grams affect the wrist fatigue faster.
The milling machine is equipped with a very modern head with a motor made in multi-bearing technology, which ensures quiet operation, without unnecessary vibrations (German production). The head has a smooth adjustment up to 30,000 rpm. For even greater user convenience, the change of the direction of rotation (left / right) is done with the same knob as the rotation control.
The milling machine is equipped with a very modern head with a motor made in multi-bearing technology, which ensures quiet operation, without unnecessary vibrations (German production). The head has a smooth adjustment up to 30,000 rpm. For even greater user convenience, the change of the direction of rotation (left / right) is done with the same knob as the rotation control.
€949.00
MILLING MACHINE WITH FILTER EXO SUPERnova
Out-of-Stock
The EXO SUPERnova milling machine, equipped with a brushless motor and dust absorber, is the successor to the legendary Magic Pedi milling machine. Milling machine made in Germany.The device is intended for the treatment of foot ailments and professional pedicure treatments and may only be operated by a qualified podiatrist or pedicurist. The milling machine is characterized by smooth speed control from 0 to 30,000 per minute, with the possibility of changing the right-left direction, and the power of the dust absorber. An indispensable advantage of the device is the electronic display that allows you to control the intensity of the treatment, the degree of filter filling and the extraordinary power of the 350 W suction turbine.
€949.00
€1,049.00
SAEYANG ES6 HEAD FOR MARATHON MILLING MACHINE
Marathon ES6 head / spindle - designed for N7 and YOSHIDA milling machines
- Speed: 40,000 rpm
- Made of stainless steel
- Can be sterilized in an autoclave at 135 degrees
- Speed: 40,000 rpm
- Made of stainless steel
- Can be sterilized in an autoclave at 135 degrees
€99.00
Milling machine MARATHON CHAMPION 3 with a new generation handle H200 for manicure and nail extension
The device is from one of the world's most recognized manufacturers.
Variable speed up to 30,000 rpm. Pedal included.
Power 45 W.
Weight 1.3 kg
Size: 116/155/85
Handle weight: 148g
Handle size 143 x 25 mm
White color
Variable speed up to 30,000 rpm. Pedal included.
Power 45 W.
Weight 1.3 kg
Size: 116/155/85
Handle weight: 148g
Handle size 143 x 25 mm
White color
€159.00
€199.00
SAEYANG HEAD SH20N WHITE FOR MARATHON MILLING MACHINE
Saeyang head
2.7 Ncm high torque head . It reaches speeds of up to 30,000 revolutions per minute.
Suitable for Marathon milling machines:
• Champion
• Mighty
• K35 Cube
• Marathon-4
• Marathon-4 Mini
• Escort-III
• Escort-II PRO
• K35
• N2
• N2 (old version)
Specification:
Torque: 2.7 Ncm
Speed: 0-30,000 rpm
Dimensions: 128 x 26 mm
Weight: 146 g
Cable length: 1.5 m
2.7 Ncm high torque head . It reaches speeds of up to 30,000 revolutions per minute.
Suitable for Marathon milling machines:
• Champion
• Mighty
• K35 Cube
• Marathon-4
• Marathon-4 Mini
• Escort-III
• Escort-II PRO
• K35
• N2
• N2 (old version)
Specification:
Torque: 2.7 Ncm
Speed: 0-30,000 rpm
Dimensions: 128 x 26 mm
Weight: 146 g
Cable length: 1.5 m
€99.00