VALERI ACRYL GEL Nr. 07 - 15ml
Valeri Gel Acryl has a high density and thick consistency. It is low-temperature, fine-grained and easy to apply. It does not stick to the brush, plastic in work and stiff after curing, perfectly aligns and holds the arch of the nail plate. It is easy to shape the length and thickness of the nail plate with acrylic gel using an orange stick or brush, wetting regularly in prep liquid or clincher. It is densely pigmented and does not bake in the lamp.
Acrygel is suitable for extensions on both upper and lower forms, for corner extensions and nail plate leveling. All of its shades can be used for lined french. You can press the arch for 10-15 seconds, degrease and make a light pollination of the form. The molds are easy to pollinate with both a file and a router.
We recommend that you buy polygel together with other products of the brand, so that the manicure turned out to be resistant, durable and beautiful.
Modeling acrylic gel Valeri does not have a pronounced pungent odor, is presented in a convenient tube.
Features of Valeri Acryl Gel:
high density;
thick consistency;
for strengthening, building, modeling;
does not bake in the lamp;
plastic in work;
low-temperature;
fine-grained;
with a light, pleasant scent;
in a tube.
Application of Valeri Acryl Gel:
Perform standard nail preparation. Correct the shape with a manicure file and polish the surface with a nail buff.
Treat the cuticle in the desired way: push back with a manicure spatula, pre-softened with a remuver, cut with cuticle clippers or manicure scissors or make a combi manicure with a manicure cutter.
Use an antiseptic and nail degreaser to remove germs, excess moisture and dirt.
Use Valeri Ultrabond acid-free primer (acidic if necessary) before applying the gel polish base.
Coat nails with Valeri Rubber Base and dry in a UV/LED lamp for 60-120 seconds.
Trim and place the mold under the nail.
Place a layer of Valeri Acryl Gel on the mold and shape the nail plate. Polymerize for 60 seconds in a UV/LED lamp. Then you need to clip the arch and repeat the drying cycle in the lamp.
Apply the second layer of Valeri Acryl Gel and polymerize in the lamp. After that, similarly to the first layer, press the arch and in the fixed position let the material cool down for 3-4 minutes.
Treat the modeled nail from the outside and inside with Nail Prep and, if necessary, give it the desired shape with a file.
Thoroughly remove any residual dust after filing with a freesher and a lint-free cloth.
Coat the nail plate with Valeri Finish Coat and dry for 60-90 seconds in a UV/LED lamp.
OR
Apply colored gel polish in several coats, drying each coat in the lamp. Then topcoat with a layer of gel polish topcoat.
Remove any remaining sticky layer with a clincher.
When finished, treat the peri-nail area with cuticle oil to moisturize.
Ingredients:
Acrylates copolymer, polyurethanemethacrylate 2-hydroxyethyl methacrylate ethyl (2,4,6-trimethylbenzoyl), phenylphosphinate, fumed silica.
