Nail Drill Bits, tools
There are 134 products.
5000236 Tungsten carbide nail drill bit
- High wear resistance- Perfect heat reduction- Very high removal- Completley resistant to chemical disinfectants- an absolute "EYE-CATCHER" in your studioSolid carbide cutters with cutting cone tip with cross toothing The bit is characterized by very high strength and durability. Working on artificial nails is guaranteed by the rounded cutting tip. The cutter is designed for professional use for the removal of gel and acrylic panels with high efficiency and celebrations. It will also act like the removal of calluses. Wet and dry use.
€11.95
5001201 Carbide Bits, Tunnel, Medium Grit
- High wear resistance
- Completley resistant to chemical disinfectants
Carbide cutter is characterized by very high strength and durability. The cutter is designed for professional use for the removal of gel and acrylic. It will also act like the removal of calluses. Wet and dry use.
- Completley resistant to chemical disinfectants
Carbide cutter is characterized by very high strength and durability. The cutter is designed for professional use for the removal of gel and acrylic. It will also act like the removal of calluses. Wet and dry use.
€11.95
Carbide Bits, Tunnel, Medium Grit 5001202
- High wear resistance
- Completley resistant to chemical disinfectants
Carbide cutter is characterized by very high strength and durability. The cutter is designed for professional use for the removal of gel and acrylic. It will also act like the removal of calluses. Wet and dry use.
- Completley resistant to chemical disinfectants
Carbide cutter is characterized by very high strength and durability. The cutter is designed for professional use for the removal of gel and acrylic. It will also act like the removal of calluses. Wet and dry use.
€11.95
Carbide cutter "Tunnel", coarse grit + 1102921
- High wear resistance
- Completley resistant to chemical disinfectants
Carbide cutter is characterized by very high strength and durability. The cutter is designed for professional use for the removal of gel and acrylic. It will also act like the removal of calluses. Wet and dry use.
- Completley resistant to chemical disinfectants
Carbide cutter is characterized by very high strength and durability. The cutter is designed for professional use for the removal of gel and acrylic. It will also act like the removal of calluses. Wet and dry use.
€11.95
Podologist Kit X4
Professional Podiatry Kit
An ergonomic workstation is the key to performing precision procedures comfortably.
The kit includes:
- Y-200 Podology Unit
- Milling machine with Exo Podo Line absorber
- Lamp with magnifying glass Elegante 6025
- UV sterilizer
An ergonomic workstation is the key to performing precision procedures comfortably.
The kit includes:
- Y-200 Podology Unit
- Milling machine with Exo Podo Line absorber
- Lamp with magnifying glass Elegante 6025
- UV sterilizer
€1,149.00
€1,299.00
Carbide milling cutter Yolka (F)
Due to its design, it is best suited for working through all styling masses, when correcting downward-growing nails, as well as for leveling irregularities formed from below, when working with dualforms and acrylic gel, while safely moving the cuticle away from the surface of the nail plate, without fear of injury.
Dimensions of the working part:
Diameter at the narrowest part of the cutter: 1 mm
Diameter at the widest part of the cutter: 6 mm
Dimensions of the working part:
Diameter at the narrowest part of the cutter: 1 mm
Diameter at the widest part of the cutter: 6 mm
€4.95
€7.95
Carbide milling cutter Yolka (M)
Due to its design, it is best suited for working through all styling masses, when correcting downward-growing nails, as well as for leveling irregularities formed from below, when working with dualforms and acrylic gel, while safely moving the cuticle away from the surface of the nail plate, without fear of injury.
Dimensions of the working part:
Diameter at the narrowest part of the cutter: 1 mm
Diameter at the widest part of the cutter: 6 mm
Dimensions of the working part:
Diameter at the narrowest part of the cutter: 1 mm
Diameter at the widest part of the cutter: 6 mm
€7.95
Carbide milling cutter Yolka (С)
Due to its design, it is best suited for working through all styling masses, when correcting downward-growing nails, as well as for leveling irregularities formed from below, when working with dualforms and acrylic gel, while safely moving the cuticle away from the surface of the nail plate, without fear of injury.
Dimensions of the working part:
Diameter at the narrowest part of the cutter: 1 mm
Diameter at the widest part of the cutter: 6 mm
Dimensions of the working part:
Diameter at the narrowest part of the cutter: 1 mm
Diameter at the widest part of the cutter: 6 mm
€7.95
MARATHON Mighty router with new generation H35 35000 rpm handle.
Machine from one of the world's most recognized manufacturers.
Adjustable speed up to 35000 rpm. Pedal included.
Handle weight: 210 g
Adjustable speed up to 35000 rpm. Pedal included.
Handle weight: 210 g
€139.00
€169.00
MARATHON Mighty router with new generation handle H200
Machine from one of the world's most recognized manufacturers.
Adjustable speed up to 30000 rpm. Pedal included.
Power 45 W.
Weight 1.3 kg
Size: 116/155/85
Handle weight: 148 g
Handle size 143 x 25 mm
Color: white
Adjustable speed up to 30000 rpm. Pedal included.
Power 45 W.
Weight 1.3 kg
Size: 116/155/85
Handle weight: 148 g
Handle size 143 x 25 mm
Color: white
€129.00
€139.00
Carbide cutter "Medium Blue Cone Ø5.0mm", suitable for processing acrylic and gel
The cutter is suitable for gel, acrylic and hybrid masses.
The cutter is suitable for all milling machines with a swivel head.
The cutter guarantees a faster collection of material, even very hard ones, without unnecessary vibrations.
The service life of the cutter has tripled.
The cutter can be safely sterilized and disinfected.
The cutter is suitable for all milling machines with a swivel head.
The cutter guarantees a faster collection of material, even very hard ones, without unnecessary vibrations.
The service life of the cutter has tripled.
The cutter can be safely sterilized and disinfected.
€7.95
€9.95
Carbide cutter "Medium Blue Cone Ø3.1mm", suitable for processing acrylic and gel
The cutter is suitable for gel, acrylic and hybrid masses.
The cutter is suitable for all milling machines with a swivel head.
The cutter guarantees a faster collection of material, even very hard ones, without unnecessary vibrations.
The service life of the cutter has tripled.
The cutter can be safely sterilized and disinfected.
The cutter is suitable for all milling machines with a swivel head.
The cutter guarantees a faster collection of material, even very hard ones, without unnecessary vibrations.
The service life of the cutter has tripled.
The cutter can be safely sterilized and disinfected.
€7.95
€9.95